1 Getting Started
1 This chapter introduces you to the external components of your Pocket PC and guides you through the process of setting up your Pocket PC for use.
1.1 Hardware Features
The illustrations below introduce you to the various buttons, connectors, ports and features of your Pocket PC.
Front Components
Ref |
Component |
Description |
| 1 |
Touch Screen |
Displays the output of your Pocket PC. Tap the screen with the stylus to select menu commands or enter |
| 2 |
Program Buttons |
Each of the four buttons provides a quick way to start a specific program. The buttons are customizable. The icons on the buttons indicate the default programs associated. |
| 3 |
Microphone |
Receives sound and voice to record voice. |
| 4 |
Navigation Stick |
Moves up, down, left or right by pushing the button toward the corresponding direction.
Selects by pressing. |
| 5 |
Speaker |
Sends out music, sounds and voice. |
| 6 |
Charge Indicator |
Glows in amber to indicate that battery charging is in progress and in green when the battery is fully charged. |
| 7 |
Notification Indicator |
Flashes in red to inform you of scheduled appointments, alarms and reminders. |
Back Components
Ref |
Component |
Description |
| 1 |
GPS Antenna |
Receives signals from the GPS satellites overhead when lifted up to the horizontal position. |
| 2 |
Car Antenna Connector |
Inside the rubber cover is a connector for connecting a GPS car antenna (optional) so that the antenna can be positioned on top of the car for better signal reception. |
| 3 |
ON/OFF Switch |
Restores your Pocket PC to factory default state. |
Left-Side Components
Ref |
Component |
Description |
| 1 |
Lanyard Eyelet |
Lanyard attaches to this opening. |
| 2 |
Power Button |
Turns your Pocket PC on or off by pressing briefly.
Turns the screen backlight off by pressing and holding. |
| 3 |
Record Button |
Records voice notes by pressing and holding. |
| 4 |
Reset Button |
Restarts your Pocket PC. |
| 5 |
Headphone Connector |
Connects to a pair of stereo headphones. |
Top Components
Ref |
Component |
Description |
| 1 |
IR Port |
Beams files to other mobile devices. |
| 2 |
SD/MMC Slot |
Accepts an optional SD (Secure Digital) or MMC (MultiMediaCard) card for removable storage. |
| 3 |
Stylus |
Tap on the touch screen to make selections and enter information. Pull the stylus out of its slot to use and store it in the slot when not in use. |
Bottom Components
Ref |
Component |
Description |
| 1 |
ActiveSync Connector |
Connects to the ActiveSync cable or USB cradle (optional). |
Car Accessories
CAUTION:
If the car’s windshield has window tint, it is recommended that you use a car antenna (optional) to route the antenna to the top of the car through the window. When closing the car window, be careful not to pinch the antenna. (For a car with the anti-jam design, the window will automatically leave space.)
To protect your Pocket PC against sudden current, connect the car charger only after the car engine has been started.
Car Holder
Fix your Pocket PC to the car holder when using your Pocket PC for car navigation. See the documentation supplied with the car holder for installation instructions.
Car Charger
Connect to the cigarette lighter in the car for powering and charging your Pocket PC.
